The QSC I-282H is a dual 8-inch, 2-way, full-range loudspeaker with
contemporary styling that easily integrates into multiple environments.
Pole mounted, truss mounted, or used as a floor monitor/stage fill, these
injection molded speakers are an excellent choice for musicians, mobile
entertainers, and anyone else needing a high-quality, lightweight SR package
that sounds superb, is visually unobtrusive, and with its built-in handles,
is easy to transport.
The I-282H enclosure incorporates two 8” weather resistant, LF
transducers with heavy-duty double roll cloth surrounds and a 1”
exit HF compression driver. The HF driver is coupled with QSC’s
unique Advanced Directivity™ Rotatable Waveguide—enabling
the loudspeaker to deliver accurately focused sound, regardless of its
orientation. For quick and secure input setup, the I-282H provides two
parallel Speakon™ connectors.
An ideal solution for a variety of mobile SR applications, the I-282H
includes a pole cup for pole mounting with either 1 1/2” or 1 3/8”
diameters. Or by using the included yoke mount with swivel extension feet,
the I282-H can be vertically or horizontally mounted for pan and tilt
focusing or used as a floor monitor. For truss mounting, the yoke accepts
most industry standard truss clamps.
FEATURES
Dual 8-Inch, 2-Way System — in a lightweight,
weather-resistant, multipurpose enclosure featuring a heavy duty, powder
coated aluminum grill.
Advanced Directivity™ Rotatable Waveguide —
(90° x 60°) enables the loudspeaker to deliver accurately focused
sound, regardless of the enclosure’s mounted orientation.
High Power Capability — 450W rated (IEC).
Switchable Biamp or Passive Operation — with parallel
outputs.
Contemporary Style, Weather Resistant Enclosure and Components
— ideal for a wide range of applications.
Two Parallel Speakon™ Connectors — for quick,
secure audio input setup.
Pole Cup, Yoke mount, and Monitor feet — included
for versatile mounting options.
Specifications
|
|
I-282H
|
| Configuration |
|
Compact
two way, ported enclosure |
Transducers
• Low Frequency Transducer
• High Frequency Transducer |
|
Dual 8" high power, treated paper cone, 2" voice coil, neodymium
magnet
1" high output compression driver, 1.7" diameter voice coil |
Frequency
Range [1]
• Frequency Response
• Useable Frequency Range |
|
80 Hz - 27.7 kHz (-6 dB)
60 Hz - 29.5 kHz (-10 dB) |
Maximum
Output [2]
• Calculated Peak Output
• Calculated Continuous Output |
|
125 dB SPL
119 dB SPL |
| Impedance |
|
8
ohm nominal (5.25 ohm minimum, 17.6 kHz, 64 ohm maximum, 2.56 kHz) |
Power
Rating
• RMS Power Handling [3]
• Recommended Max Amp Power
|
|
450 W (IEC, 8 hours)
900 W RMS |
| Sensitivity |
|
93
dB, 1 m, free field |
| Nominal
Coverage |
|
90°H
x 60°V (-6 dB) (rotatable to 60°H x 90°V) |
| Bass
Loading |
|
Ported,
tuned to 60 Hz |
| Enclosure |
|
|
| Material |
|
Injection
molded, weather resistant, high impact polystyrene |
| Finish |
|
Black |
| Weather
Resistance |
|
Yes |
| Grill |
|
Heavy
duty powder coated aluminum |
| Connectors |
|
Two
Neutrik Speakon NL4FC connectors wired in parallel, Passive/active
switchable |
| Mounting
Hardware |
|
Included:
Pole cup and Yoke mount. |
| Weight |
|
28.5
lb (12.9 kg) net
36.8 lb (16.7 kg) shipping |
[1] All frequency ranges specified refer to measured free field response
(full space, 4pi).
[2] Calculated SPL at 1m, full space (4pi), speaker operating at rated
RMS power with pink noise within specified frequency range.
[3] Maximum input power tested in accordance with IEC 268-5 recommendations,
50 Hz - 20 kHz band limiting, 6 dB signal crest factor, 8 hours.
|
Specifications subject to change without notice
Loudspeakers are priced individually, sold only in pairs
|
| * Free shipping is ground shipping and
applies to online orders only |
