Home > DJ SPEAKERS > Kustom PA Systems > Kustom Profile System 1

Kustom Profile System 1

Product Description

Kustom's Profile System One, a 24-bit digital, portable, and powerful, 100-watt P.A. System.

Profile's 100 watts of power and the focused audio dispersion pattern of the Line Array speakers enable the system to reach deeper into the audience - giving your message clarity and attention. You can bet they're going to hear what you have to say. The more you use your Profile System One, the more you'll appreciate it's comforting, compact size and incredibly big sound. Acoustic guitarists will love the contoured instrument input, especially when you add a hint of hall reverb into your mix. Four balanced XLR inputs, with phantom power, allow you to use every type of microphone available, even condenser mics for use with pianos and other hard-to-mic instruments. Five line level inputs - enough to accommodate every keyboard, drum machine, and sampler you own. Connect youre favorite outboard pedal or rack effect into Profile's effect bus and simultaneously use Profile's digital effects. Lastly, the integrated, ergonomic carry handles and the compact design of the line array cabinets make stage setup and tear down a breeze. Simply load everything you need into the optional Profile System One roller bag and get to the stage with ease.

Profile System One Specifications

Model: KPS-PM100 Profile System One Powered Mixer

Output Power: 100W 4 ohms @ 10% THD, 80W 4 ohms @ 0.4% THD
Frequency Response: 20Hz-20kHz
Actual response is tailored to speaker cabinet for accurate acoustical response
Total Harmonic Distortion: less than 0.4%
Measured at 1 VRMS (0dBv) at record output, effects send, or insert output
Hum & Noise: -115dB Mic Input Rs=150 ohm, 20-20kHz
             -52dB Residual Noise, all level controls 0% (minimum)
             -50dB Nominal System Noise, all level controls at 50%
System Gain: All measurements made at 1kHz
   77dB - Mic to Power Amp Out (Ch 1 - Ch 4)
   57dB - Line to Power Amp Out (Ch 1 - Ch 5)
   53dB - Instrument to Power Amp (Ch 5)
   32dB - Playback to Power Amp
   57dB - Mic to Record Output
   44dB - Mic to Effects Send
   52dB - Mic to Insert Output
   25dB - Insert Input to Power Amp Output
Crosstalk: 80dB Channel to channel, 1kHz
Input Channel Equalization: Special curve that adjusts bass, mid, and treble frequencies
Master Equalization: 100Hz (Bass), 1kHz (Mid), 10kHz (Treble) all ą12dB
Digital Effects: 24 bit DSP, 8 effects; small room, large room, small hall, large hall, chorus, chorus reverb, slap back (delay), echo
Phantom Power: +15V Applied to all Mic Inputs thru 3.3K resistors
Footswitch: Digital effects ON/OFF and Channel ON/OFF (playback remains active)
Power Requirements:
USA/Canada: 120VAC/60Hz, 100W nominal
Europe: 230VAC/50Hz, 100W nominal
UK: 230VAC/50Hz, 100W nominal
Australia: 240VAC/50Hz, 100W nominal
Japan: 100VAC/50-60Hz, 100W nominal
Dimensions: mm/kg 326 (Height) x 226 (Width) x 270 (Depth), 8.2 kg
            inches/pounds 12 7/8 (Height) x 8 7/8 (Width) x 10 5/8 (Depth), 18.0 lbs

Model: KPS-LS100 Profile System One Loudspeaker System

Speaker Complement: Low 6.5" Wide-range cone speaker (2)
High: Horn Piezo Tweeter, 2" x 6"
Power Capacity: 50W Noise per EIA RS-426
100W Program power (music power)
Frequency Response: 80Hz - 20kHz +/- 3dB when used with KPS-PM100 Amplifier
Crossover Frequency: 5kHz Cone speaker operated full-range
Nominal Impedance: 8 Ohms Accurate acoustical response
Sensitivity: 94dB Measured 1Watt @ 1 meter
Dimensions: mm/kg 485 (Height) x 226 (Width) x 270 (Depth), 8.2 kg
            inches/pounds 19 1/8 (Height) x 8 7/8 (Width) x 10 5/8 (Depth), 18.0 lbs